Multi-effect evaporation concentrator

Product description

The heat released by 1kg steam condensation is basically the same as the heat absorbed by evaporation of 1kg water, Therefore to single-effect evaporation, 1kg water in the material for evaporation will consume 1kg live steam ; if the secondary steam is used to heat up the steam for the next effect, the consumption of secondary steam and live steam will be cut down by 50% . When the number of effect increases, steam consumption decreases while the investment in equipment increases subatantially.Therefore usually it shall not be more than 5 effects.

Specifications

Sales markets	Asia
Supplied from	China
Certifications	Quality assurance

More products from Nanjing Gaojie Light Industrial Equipment Co., Ltd.

MVR tubular forced circulation evaporator

The MVR forced circulation evaporation system consists of the main equipment of the evaporator, separator and forced circulation pump, and steam compressor. The material exchanges heat with the steam outside the tube in the tube of the evaporator, and the temperature rises; the solution after the temperatu...

More info

plate evaporator

Riser plate evaporator：Each group consists of two plates of different forms, the material enters from the middle of the lower end of the plate, and the steam-water mixture exits from the large-shaped port at the upper end of the plate; the steam enters from the small-shaped opening at the upper end of the ...

More info